• Reference Table of Molding Temperatures for Common Injection Molding Materials

  The injection molding temperature is one of the core process parameters that determine the quality of injection molded products. It is mainly divided into two key dimensions: the melting temperature a

  2026/01/17 Injection Molding

• Selection of Optical Injection Mold Steels

  The selection of mold steel is critical for producing high‑precision optical plastic components such as lenses, light guides, and sensor housings. Unlike standard injection molds, optical molds requir

  2026/01/17 Injection Mold

• Weather Resistance Classification of Plastics

  Weather resistance refers to a plastic’s ability to maintain its mechanical and appearance properties after long-term outdoor exposure to UV, temperature changes, humidity, and rain. It is critical fo

  2026/01/17 Plastic Molds

• How to Shorten Injection Molding Cycle Time

  The injection molding cycle time refers to the total duration required to complete one full molding cycle, consisting of five core stages: injection, holding pressure, cooling, mold opening/ejection,

  2026/01/16 Injection Molding

• Pressure Loss Range in Hot Runner Injection Molding

  Pressure loss in hot runner injection molding refers to the pressure decay that occurs as molten plastic flows through the hot runner system—including the sprue bushing, manifold, nozzles, and gates—d

  2026/01/16 Hot Runner Injection Molding

• Selection of materials for ABS molds

  ABS (Acrylonitrile Butadiene Styrene), known for its balanced toughness, rigidity, and flowability, is a staple in general engineering plastics. Selecting the right mold material requires aligning the

  2026/01/16 Injection Molds

• Temperature Zone Control Methods for Hot Runner Injection Molding

  Hot runner technology is widely used in precision and high-volume injection molding due to its material savings, efficiency, and improved part quality. Temperature zone control is the core of a stable

  2026/01/15 Injection Molding

• A Concise Guide to Ejector Pin Wear Inspection and Replacement

  Ejector pins are among the most critical and vulnerable components in plastic injection molds. Their surface condition and dimensional accuracy directly impact part appearance and stability. Operating

  2026/01/15 Injection Molds