• How to Select Mold Steels for TPV Products

  TPV (Thermoplastic Vulcanizate) has high viscosity, strong flow impact, and contains additives that may cause corrosion or abrasion. Choosing the correct mold steel is critical for service life, surfa

  2026/03/02 Plastic Molds

• Injection Molding Guidelines for TPE Materials

  TPE is a widely used soft elastomer with good elasticity, touch, and processability. However, it is sensitive to temperature, shear, and cooling. Stable production requires careful control of material

  2026/03/02 Injection Molding

• Material Selection for TPR Molds

  TPR (Thermoplastic Rubber) is a widely used soft elastomer material in the manufacturing of daily necessities, tool handles, grips, toys, sealing components, protective sleeves and electronic accessor

  2026/03/01 Injection Molding

• Precautions for TPU Plastic Injection Molding

  TPU is a widely used thermoplastic elastomer with excellent elasticity, toughness and wear resistance, making it suitable for seals, handles, rollers, hoses, protective cases and automotive components

  2026/03/01 Injection Mold

• Precautions for PPS Plastic Injection Molding

  PPS is a high-temperature engineering plastic with high rigidity, low water absorption, and narrow processing window. It requires strict control of drying, temperature, injection, and cooling to avoid

  2026/02/28 Injection Molding

• How to Select Mold Steel for TPR Products

  TPR is a thermoplastic elastomer with medium fluidity and low corrosion. Mold steel selection depends on hardness, transparency, output, and appearance requirements.Key Requirements for TPR MoldsWear

  2026/02/28 Injection Molds

• Material Selection for TPE Molds

  TPE (thermoplastic elastomer) offers soft touch, elasticity, and good processability, widely used in consumer goods, handles, electronics, automotive, and sealing components. TPE compounds often conta

  2026/02/27 Injection Molding

• Troubleshooting Insufficient Clamping Force in Plastic Molds

  Insufficient clamping force causes flash, overflow, oversized parts, and mold damage. Many flash issues are mistakenly solved by increasing clamping force without identifying the real cause. This arti

  2026/02/27 Injection Moldshooren