• Temperature Stability Requirements for Thermoplastic Elastomer Injection Molding

  Thermoplastic elastomers (TPE/TPR, including SBC, TPU, TPO, TPEE and other types) combine the physical properties of elastomers with the processability of thermoplastic injection molding. The phase eq

  2026/01/28 Injection Molding

• Common Plastic Density (Specific Gravity) Reference Table

  This is a reference table specifically for the plastic density (specific gravity) selection of industrial materials, product design and production processing. All the data are the industry standard va

  2026/01/28 Plastic Molds

• Repair Methods for Cavity Wear of Injection Molds

  Injection mold cavities, the core of plastic molding, are prone to surface scratches, wear depressions and dimensional deviations due to long-term molten material scouring, high-pressure extrusion and

  2026/01/27 Injection Molds

• Rust Treatment and Anti-rust Protection for Plastic Molds

  Plastic molds are prone to rust on cavities, cooling water channels and ejector pin holes due to contact with molten plastic, condensed water, humid storage or inadequate post-shutdown protection. The

  2026/01/27 Plastic Molds

• Methods for Precise Debugging of Temperature Parameters in Injection Molding

  cavity filling and product cooling setting. Precise temperature debugging can reduce defects such as short shots, sink marks, warpage and flash, improve product dimensional accuracy and appearance con

  2026/01/27 Injection Molding

• PE Material Spray-painted Shell Injection Mold Steel Selection Guide

  PE (polyethylene) is widely used in the production of spray-painted shell appearance parts for the automotive, home appliance and consumer electronics industries due to its advantages of light weight,

  2026/01/27 Injection Mold

• Key Considerations for ABS Plastic Injection Molding

  ABS plastic, a terpolymer of acrylonitrile, butadiene and styrene, boasts excellent rigidity, toughness and process fluidity, and is one of the most widely used general engineering plastics in injecti

  2026/01/27 Plastic Injection Molding

• Injection Mold Release Agent Selection Guide

  The core function of an injection mold release agent is to create a lubricating barrier between the mold cavity and the part, reducing adhesion and ensuring smooth, defect-free ejection. Selection dep

  2026/01/26 Injection Mold